Pulse Oximeter CMS50DL fingertip LED display Characteristics

Pulse Oximeter CMS60C

SPECIFICATIONS:

MODEL: CMS-60C

DISPLAY FORMAT: LARGE TFT COLOUR LCD DISPLAY: 160 X 128

PROBES: ADULT–OPTIONAL EXTRAS: NEONATE AND INFANT

POWER:1000mAh Lithium battery, AC charger

SPO2:35%-99% PULSE RATIO: 30-250BPM

RESOLUTION:±1% FOR SPO2, ±1 BPM FOR PULSE RATIO

ACCURACY:± 2% (70%-99%), UNSPECIFIED (35%-70%), ±BPM FOR PULSE RATIO

PLETHYSMOGRAM DISPLAY BATTERY INDICATOR ALARM SETTING FOR SPO2 &PULSE

QUALITY APPROVAL CE

Pulse Oximeter CMS70A desk model

1.SpO2 value display
-Pulse rate value
-bar graph
-PI display
-Pulse waveform
2.Patient Range:Adult,Pediatric,Neonatal
3.Data storage function and the storage data can be uploaded to a computer

Main performance

1.Display Mode: TFT Screen and LED display
2.Screen Resolution: 320*240
3.SpO2 Measuring Range: 0%~100%(the resolution is 1%)
4.Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
5.PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
6.Accuracy: ± 2bpm or ± 2% (select larger)
7.Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
8.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of the darkroom is less than ± 1%.
9.Power Consumption: About 350mA
10.Voltage: AC 100~240V, 50/60HZ
11.Power Supply: Built-in recharge Li-Polymer
12.Battery working hour: After the device built-in battery finished the charge, its continuous working time is not less than 1 hour
13.Safety Type: II device, BF Type

Accessories

Sell in standard
-user manual
-power wire
-data line
-oximeter probe(Adult)
-disk (PC software)

Sell in addition
Other oximeter probes (Pediatric or Neonatal)

Physical Identity

Dimension: 269(L)× 222(W)× 79(H)mm
Weight: About 1Kg

Photoelectric OxyhemoglobinInspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology; the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports and it is not recommended to use the device during the process of having sport) and etc

Specifications: 

• Dimensions – 57MM (L) X 31MM (W) X 32mm (H)
• Display format: 1.3″ double colour OLED Display, resolution 160 x 64
• SPO2 – 35 – 99% Pulse Ratio – 30 ~ 250BPM
• Resolution: 1% For SPO2, 1 BPM for Pulse Ratio
• Accuracy: (2%) 70 – 99%, Unspecified (<70%) for SPO2, 2BPM OR 2% (select larger) for pulse ration.

Battery Voltage: DC2.6V – 3.6V

• Power supply 1.5V (AAA) size alkaline batteries x2
• Continuous use >30 HOURS
• Interference resistance capacity against ambient light and measurement performance at low perfusion: NONE

Main Features

■Display of SpO2 value.

■Display of PR value and bar graph.

■Low battery indication.

■Automatic storage for SpO2 and PR value.

■Sync clock function.

■Display of steps, calories, and time.

■SThe pedometer can store data

■Display direction can be changed automatically.

■Height, weight, target calorie and pedometer sensitivity can be set by the server.

■Extra low-power consumption setting.

■The device will automatically enter to blank screen state when there is no operation for one minute.■The data stored can be uploaded to APP by Bluetooth, APP will upload the data to CLOUDplatform for analyzing.

ACT (Artery Check Technology) processes SpO2 signal and determines the stiffness of the artery (Artery condition) based on the derived wave form. It further classifies the arterial condition into 6 levels and presents the results in an intuitive graphical interface. Heart rate, SpO2 and artery condition are available at your fingertips at a glace.

Pulse Oximeter with ACT detects:

• Artery condition
• SpO2
• Heart rate

Artery condition tells the potential risk of the following diseases:

• Arteriosclerosis
• Peripheral circulation disorder
• Cardiovascular disease

Introduction

The CMS50F Pulse Oximeter adopts Photoelectric OxyhemoglobinInspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for being used in family, hospital, oxygen bar, community healthcare, and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising).